- AP SUPERPLEAT FILTER
- AP SUPER WASH FILTER
- AP ECOPLEAT FILTER
- ALUNETA
- SUPER NET
- SUPER ROLLS
- SUPER PA ROLLS
- MEGA SYNPAK FILTER
- MEGA POLIPAK FILTER
- MEGA VPAK FILTER
- MEGA ZPAK FILTER
- MEGA QPAK FILTER
PLEATED EXTENDED SURFACE COARSE FILTER | PRE-FILTER
FreshAir intake filter with low initial pressure drop and disposable pleated type (Standard Flow Model) with cardboard / metal frames with laminated wire mesh support and synthetic media.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Disposable Pleated Standard /High Flow Pre-Filter |
| Efficiency (ISO 16890) | ISO Coarse 60% |
| Filter Class (EN 779: 2012) | G4 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 8 |
| Filter Depth | 1”, 2” & 4” |
| Frame Material | Beverage Board water resistant type / Metal Frame |
| Filter Media | Non-woven synthetic type |
| Media Support | Expanded metal support grid on air exit side |
| Recommended Final Pressure Drop | 1.20” wg |
| Maximum Temperature | 80 °C maximum during continuous operation |
| Flammability | UL 900 Classified |
| Mounting Options | Side and front access housings and frames are available |
Applications
• Pharmaceutical
• Health care
• Hospital
• Residential
• Commercial
• Industrial
• Biomedical
• Biotechnology
• Universities
• Laboratories
• Food processing
• Photo processing
SUPER WASH FILTER
PLEATED EXTENDED SURFACE CLEANABLE FILTER | PRE-FILTER
High Dense Multi-Layer Washable Polyester media filter in pleated form. Typically used for AHU/HVAC Coarse filter in metal frames with wire mesh support on both sides of media.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Cleanable Pre-Filter/ Washable Type |
| Efficiency (ISO 16890) | ISO COARSE 50% / ISO COARSE 60% / ISO Coarse 65% |
| Filter Class (EN 779: 2012) | G2 / G3 / G4 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 4 / MERV 6 / MERV 8 |
| Filter Depth | 2”, 4” & 6” |
| Frame Material | Metal Frame – G.I / SS / Al |
| Filter Media | 100% Synthetic based Polyester Fiber |
| Media Support | PVC Coated steel mesh support on both sides |
| Recommended Final Pressure Drop | 1.20” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C-100°C maximum during continuous operation |
| Flammability | UL 900 Classified |
| Mounting Options | Side and front access housings and frames are available |
ECOPLEAT FILTER
VEE TYPE EXTENDED SURFACE SELF SUPPORTED RIGID PLEATED FILTER | PRE-FILTER
Perfect Pure Vee type self-supported rigid pleated filters with lower IPD for AHUs, Power machines & for other Air intake devices, available in Metal / Plastic / Cardboard frames.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Washable / Disposable Pre-Filter |
| Efficiency (ISO 16890) | ISO Coarse 65% |
| Filter Class (EN 779: 2012) | G4 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 8 |
| Filter Depth | 2” & 4” |
| Frame Material | Plastic / Cardboard/ Metal Frame – G.I / SS / Al |
| Filter Media | Polyester Media- Synthetic Self-Supporting type |
| Media Support | No wire mesh support required |
| Recommended Final Pressure Drop | 1.20” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C during continuous operation |
| Mounting Options | Side and front access housings and frames are available |
Applications
• Pharmaceutical
• Biomedical
• Microelectronics
• Biotechnology
• Microbiology
• Research Labs
• Food Industry
• Nanotechnology
• Nuclear Industry
• LCD Manufacturing
• Medical Device Fabrication
• Semiconductor Fabrication
• Aerospace
• Healthcare
ALUNETA
PERMANENT CLEANABLE METAL FILTER | PRE-FILTER
High Coarse particle filtration purpose air filters with multi-layer expanded Aluminium mesh filters, washable type in metal frames.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Aluminum Washable Metal Pre-Filter |
| Efficiency (ISO 16890) | ISO COARSE 30 |
| Filter Class (EN 779: 2012) | G2 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 4 |
| Filter Depth | 1”,2” & 4” |
| Frame Material | Metal Frame – G.I / AL |
| Filter Media | Slit and expanded type graduated Density Aluminum media |
| Recommended Final Pressure Drop | 1” wg |
| Maximum Relative Humidity | 80% |
| Maximum Temperature | 200°C |
| Flammability | UL 900 Certified |
| Mounting Options | Side and front access housings and frames are available |
SUPER NET
PERMANENT METAL FILTER | PRE-FILTER
Permanent metal washable filters with multiple layers of metal media for arresting very coarse chips, oil & grease filtration purposes.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Washable Metal Pre-Filter |
| Filter Class (ISO 16890) | ISO COARSE 30 |
| Filter Class (EN 779: 2012) | G2 |
| Efficiency (ASHRAE 52.2: 2017) | MERV 4 |
| Filter Depth | ½ “, 1”,2” & 4” |
| Frame Material | Metal Frame – G.I / SS / Al |
| Filter Media | Multiple layers of pleated metal wire mesh- SS/Al/GI |
| Media Support | Media support - Expanded metal on both sides |
| Recommended Final Pressure Drop | 1” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 200°C |
| Flammability | UL 900 Certified |
| Mounting Options | Side and front access housings and frames are available |
SUPER ROLLS
DURABLE 100% SYNTHETIC WASHABLE POLYESTER MEDIA ROLLS | PRE-FILTER
High Progressive Dense Polyester Washable Synthetic media rolls for Air intake HVAC applications in Roll forms and pad forms.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | 100% Synthetic / Polyester media rolls |
| Efficiency (ISO 16890) | ISO COARSE 50% / ISO COARSE 60% / |
| ISO Coarse 65% | |
| Filter Class (EN 779: 2012) | G2 / G3 / G4 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 4 / MERV 6 / MERV 8 |
| Filter Depth | 1/2”, 1” & 2” |
| Filter Media | Non-Woven high lofted synthetic (polyester) media |
| Recommended Final Pressure Drop | 1” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C |
| Flammability | Self-Extinguishing DIN 53438-F1 & UL 900 classified |
SUPER PA ROLLS
GLASS FIBER MEDIA ROLLS | PRE-FILTER
Viscose High Dense Glass fibre media rolls and pads for Fresh air Intake High Coarse particle filtration applications.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Disposable Glass fiber media (Paint arrestor) |
| Efficiency (ISO 16890) | ISO COARSE 30% / ISO COARSE 45% / ISO Coarse 55% |
| Filter Class (EN 779: 2012) | G2 / G3 / G4 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 4 / MERV 6 / MERV 8 |
| Filter Depth | 1”, 2”,3”, 4” & 5” |
| Filter Media | Glass fiber |
| Recommended Final Pressure Drop | 1” wg |
| Maximum Temperature | 80°C |
| Nominal Media Velocity | 0.65 m/sec – 1.75 m/sec |
MEGA SYNPAK FILTER
SYNTHETIC EXTENDED MULTI POCKET FILTER | MICRO FINE MEDIA
Synthetic Meltblown pocket filters for Medium, fine particulate efficiency, HVAC AHU applications with multiple options.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Extended Surface Bag Filter / Pocket Filter |
| Efficiency (ISO 16890) | ePM10 60% / ePM10 70% / ePM10 80% / ePM10 85% / ePM10 90% |
| Filter Class (EN 779: 2012) | M5, M6, F7, F8, F9 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 10, MERV 12, MERV 13, MERV 14, MERV 15 |
| Frame Material | Metal Frame – G.I / SS / Al / Polystyrene (20 / 25mm Header) |
| Filter Media | Melt blown Synthetic |
| Recommended Final Pressure Drop | 1.20” wg |
| Maximum Pressure Drop | 1.80” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C |
| Flammability | UL 900 Classified |
| Mounting Options | Side and front access housings and frames are available |
MEGA POLIPAK FILTER
EXTENDED SURFACE POLYESTER POCKET FILTER | MEDIUM & FINE MEDIA
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Bag Filter / Pocket Filter |
| Efficiency (ISO 16890) | ePM10 60% / ePM10 70% / ePM10 80% / ePm10 85% |
| Filter Class (EN 779: 2012) | M5, M6, F7, F8 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 10, MERV 12, MERV 13, MERV 14 |
| Frame Material | Metal Frame – G.I / SS / Al / Polystyrene (20 / 25mm Header) |
| Filter Media | High Dense Poly Propylene |
| Recommended Final Pressure Drop | 1.20” wg |
| Maximum Pressure Drop | 1.80” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C |
| Flammability | UL 900 Classified |
| Mounting Options | Side and front access housings and frames are available |
Applications
• Pharmaceutical
• Biomedical
• Microelectronics
• Biotechnology
• Microbiology
• Research Labs
• Food Industry
• Nanotechnology
• Nuclear Industry
• LCD Manufacturing
• Medical Device Fabrication
• Semiconductor Fabrication
• Aerospace
• Healthcare
MEGA VPAK FILTER
COMPACT V-TYPE EXTENDED RIGID CELL FILTER | FINE & MEDIUM FILTER
Compact Extended surface V-Type rigid Air filters with glass fibre and nano fibre media for Low IPD, longer life HVAC applications.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | High Efficiency V-Type Rigid Filter |
| Efficiency (ISO 16890) | ePM10 60% / ePM10 70% / ePM1 60% / ePM1 70% / ePM1 80% |
| Filter Class (EN 779: 2012) | M5, M6, F7, F8, F9 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 10, MERV 12, MERV 13, MERV 14, MERV 15 |
| Filter Depth | 12” |
| Frame Material | ABS Plastic |
| Header Depth | 20- or 25-mm |
| Filter Media | Micro Glass Fiber / Synthetic |
| Media Separator | Hot melt glue (Thermoplastic bead type) |
| Media Frame Bonding | 2 component Polyurethane |
| Gasket | Continuous Polyurethane on 1 or 2 sides |
| Recommended Final Pressure Drop | 2.0” wg |
| Maximum Pressure Drop | 2.5” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C |
| Flammability | UL 900 Classified media |
| Recommended Maximum Operating velocity | 3.75 m/Sec |
| Holding Frames | Side and Front access frames and Housings are available |
MEGA ZPAK FILTER
COMPACT BOX TYPE MINIPLEAT PANEL FILTER | FINE & MEDIUM FILTER
Compact Box type extended Surface Minipleat type Air filters for variable Air Volume, turbulent flow HVAC fine particle filtration application.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Extended Surface Mini-Pleat Panel Filter |
| Efficiency (ISO 16890) | ePM10 60% / ePM10 70% / ePM1 60% / ePm1 70% / ePM1 80% |
| Filter Class (EN 779: 2012) | M5, M6, F7, F8, F9 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 10, MERV 12, MERV 13, MERV 14, MERV 15 |
| Filter Depth | 1”, 2” & 4” |
| Frame Material | Metal Frames / ABS Plastic/Wet strength Beverage Board |
| Single Header Depth | 20mm or 25mm |
| Gasket (Optional) | Foamed Continuous polyurethane gasket or EPDM Flat gasket |
| Filter Media | Micro Glass Fiber (Minipleat) |
| Media Separator | Hot melt glue (Thermoplastic bead type) |
| Recommended Final Pressure Drop | 1.2” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 70°C |
MEGA QPAK FILTER
COMPACT DEEP PLEATED RIGID CELL FILTER | MEDIUM & FINE FILTER
Microglass fiber media with corrugated Aluminium separator style in Deep pleat construction for HVAC, AHU filtration applications.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Filter Category | Rigid Pleated Box Filter |
| Efficiency (ISO 16890) | ePM10 60% / ePM10 70% / ePM1 60% / ePM1 70% / ePM1 80% |
| Filter Class (EN 779: 2012) | M5, M6, F7, F8, F9 |
| Filter Class (ASHRAE 52.2: 2017) | MERV 10, MERV 12, MERV 13, MERV 14, MERV 15 |
| Filter Depth | 6” & 12” |
| Frame Material | Metal Frame-G.I/SS/Al or MDF |
| Header (Optional) | 1 or 2 side with 20mm or 25mm |
| Filter Media | Ultrafine Micro Glass Fiber |
| Media Separator | Corrugated Aluminum Separator |
| Media Frame Bonding | 2 Component Polyurethane |
| Gasket (optional) | Continuous Polyurethane on 1 or 2 sides / Neoprene Flat type |
| Recommended Final Pressure Drop | 1.2” wg |
| Maximum Pressure Drop | 1.8” wg |
| Maximum Relative Humidity | 100% |
| Maximum Temperature | 80°C-continiuos operation |
| Flammability | UL 900 Classified media |
| Holding Frames | Side and Front access frames and Housings are available |
India Factory
AP Filtration Technologies
No.50, Jay Industrial Park,
SP Ring Road, Ahmedabad, Gujarat.
Contact Us
+91 9345362883
[email protected]
© 2025 APFILTECH. All Rights Reserved